Improper application of or inadequate electrical construction safety measures can cause serious workplace hazard. In a construction site, the workers and employees can be exposed to fires, electrocution, shocks, explosions, and a couple of other types of accidents.
There are specific standards for the electrical construction safety for that particular industry. Many workplace deaths happen simply because of the ignorance of the laborers about the dangers of electricity present in their work environment. It’s vital to learn about the electrical hazards and their solutions to decrease the death rate and the number of accidents.
Electrical Construction Safety Hazards and Solutions
The electrical accidents in the constructions sites happen because of some factors – insecure environment, faulty equipment and their improper installation, and risky work practices.
Exposed Electrical Parts
Keeping high-voltage electrical parts is a risky business because just a touch can cause serious shocks and sometimes death too. The simple preventive measures that you can take are replacing covers, using guards or barriers, protect the conductors, and close the unused openings. The pull boxes, junction boxes, and fittings must have covers. It’s your job to ensure that all the live electrical parts operating at 50 volts or more are properly sealed, shielded, or isolated from general traffic.
Overhead Power Lines
The electrical construction safety can be violated if these are torn or broken away for any reason. These lines often carry a high voltage of electricity. For this reason, they should be kept away from high traffic areas, and watery places because torn energized wires will electrify the water and cause a fatality on a large scale.
Such installations should have warning signs in the vicinity. The electrical contractor working with power lines need to have specialized training and personal protective equipment. Apart from the electrical tools, other equipment used for this purpose should be made of wood or fiberglass.
Faulty and Damaged Cords
Most of the times accident happen because of the partly exposed live wires. They miss the rubber or plastic protective covering because of aging, abrasion from materials, being grazed on sharp objects, and improper fastening.
Such defective cords can cause shocks, burns, and fires. You should use only those that are rated for extra-hard usage, equipped with strain relief, and are the 3-wire type.
These are another reason for the violation of electrical construction safety. Such a problem occurs when the workers plug too many devices into a single circuit, causing overheating the cords and leading to a fire. Lack of protection from excessive flow of current and using malfunctioning tools.
You can ensure the electrical construction safety by installing high-rated fuses and circuit breakers. These will either melt or trip open in the occasion of electricity overflow and shut off the system. The use of adequate electrical outlets is necessary to avoid circuit-related accidents.
Employing safe work practices, using protective tools, discarding faulty equipment, and hiring an experienced electrical contractor can reduce the risk associated with electrical construction safety. Appointing a firm might be the best choice for project-basis work, but make sure that the recruits of the electric company are professional and skillful.